A Standard Tank Can Create a Very Custom Problem
There is a moment on a construction project when a perfectly ordinary decision starts causing very unordinary problems. The tank has been ordered. The capacity is right. The specification looks fine. Everyone assumes that part of the project is settled. Then installation begins. Suddenly, the access route is tighter than expected. A structural beam sits exactly where it shouldn't. The available floor area is being used for another service. The tank technically fits, but only after someone starts discussing which pipe needs to move, which wall needs to be adjusted and who is going to pay for it. None of this usually appears in the original quotation. Standard Dimensions Don't Know Your Building A standard tank is designed around a set of common requirements. A building, however, is rarely standard. An architect may have worked with a narrow service area. A contractor may be dealing with an awkward rooftop. An engineer may need specific inlet or outlet positions...